Configuration — Paradox EVO Intrusion Panel¶

Everything you can add with this adapter: where it goes in the tree, what you fill in, and what you can tell it to do.

ParadoxPanel¶


Add it under	nothing — this is the top of the tree
Identified by	nothing — there is only one
Role	—

What you fill in¶

Setting	Required	Default	Accepted values	What it does
ip_address	yes	—	host name or IP address	IP150+ module host or IP address
port	optional	`10000`	1–65535	TCP port (default 10000)
response_timeout_seconds	optional	`20`	1–120	Request/response timeout in seconds for panel communication
password	yes	`paradox`	text	IP150+ module password (stored as a secret)
pc_password	yes	—	text	Panel PC password (4 digits, 0000 is not allowed by the panel) (stored as a secret)

Paradox EVO48 Panel¶

Paradox EVO48 intrusion alarm panel (48 zones, 4 partitions)


Add it under	nothing — this is the top of the tree
Identified by	nothing — there is only one
Role	—

Paradox EVO192 Panel¶

Paradox EVO192 intrusion alarm panel (192 zones, 8 partitions)


Add it under	nothing — this is the top of the tree
Identified by	nothing — there is only one
Role	—

Paradox EVO HD+ Panel¶

Paradox EVO HD+ intrusion alarm panel (8-192 zones, 8 partitions)


Add it under	nothing — this is the top of the tree
Identified by	nothing — there is only one
Role	—

Partition¶

Alarm partition (area) with independent arm/disarm state and EVO regular/stay/instant/force arming


Add it under	ParadoxPanel (up to 8)
Identified by	the address you fill in below
Role	an access point people pass through

What you fill in¶

Setting	Required	Default	Accepted values	What it does
address	yes	—	1–8	Partition number (1-8)

What you can command it to do¶

Command	What happens
Arm	Arm security monitoring
Stay Arm	Arm perimeter zones only, interior zones remain disarmed
Sleep Arm	Arm perimeter and interior zones with reduced entry delay for nighttime
Force Arm	Force arm partition, bypassing open zones
Disarm	Disarm security monitoring

Zone¶

Intrusion detection zone (detector, contact, sensor)


Add it under	ParadoxPanel (up to 192), Zone Expander (up to 8), Keypad (up to 8), Keypad with Reader (up to 8), ACM-12 (up to 192)
Identified by	the address you fill in below
Role	—

What it must be linked to¶

Setting	Link to	Required	What it is for
partitions	Partition (one or more)	optional	Device references to partitions this zone belongs to

What you fill in¶

Setting	Required	Default	Accepted values	What it does
address	yes	—	1–192	Zone number (1-192)

What you can command it to do¶

Command	What happens
Bypass	Temporarily exclude from monitoring
Cancel Bypass	Cancel bypass and resume monitoring

Output¶

PGM relay output for sirens, lights, or automation


Add it under	ParadoxPanel (up to 32), ACM-12 (up to 32), Keypad (up to 32), Keypad with Reader (up to 32), Zone Expander (up to 32)
Identified by	the address you fill in below
Role	—

What you fill in¶

Setting	Required	Default	Accepted values	What it does
address	yes	—	1–32	PGM output number (1-32)

What you can command it to do¶

Command	What happens
Activate	Activate output relay or control point
Deactivate	Deactivate output relay or control point

Zone Expander¶

Zone expansion bus module


Add it under	ParadoxPanel (up to 15)
Identified by	the address you fill in below
Role	—

What you fill in¶

Setting	Required	Default	Accepted values	What it does
address	yes	—	1–15	Module address on bus
serial_number	optional	—	a number	Module serial number

Keypad¶

Security keypad for user interaction and display


Add it under	ParadoxPanel (up to 8)
Identified by	the address you fill in below
Role	—

What you fill in¶

Setting	Required	Default	Accepted values	What it does
address	yes	—	1–8	Keypad address on bus

Keypad with Reader¶

Security keypad with integrated dual card reader


Add it under	Door (up to 1), ParadoxPanel (up to 8)
Identified by	the address you fill in below
Role	counts towards anti-passback

What you fill in¶

Setting	Required	Default	Accepted values	What it does
address	yes	—	1–8	Keypad address on bus

What you can command it to do¶

Command	What happens
Enroll Card	Start card enrollment process on reader

ACM-12¶

Access control module for door and reader management


Add it under	ParadoxPanel (up to 254)
Identified by	the address you fill in below
Role	—

What you fill in¶

Setting	Required	Default	Accepted values	What it does
address	yes	—	1–254	Module address on bus
serial_number	optional	—	a number	Module serial number

Door¶

Physical access control door with lock state


Add it under	ACM-12 (up to 32), ParadoxPanel (up to 32)
Identified by	the address you fill in below
Role	an access point people pass through

What you fill in¶

Setting	Required	Default	Accepted values	What it does
address	yes	—	1–32	Door number (1-32)

What you can command it to do¶

Command	What happens
Open	Open door momentarily (unsecure strike temporarily)
Open Permanent	Hold door unsecured indefinitely (extended access mode)
Close	Close a permanently opened door - return to normal operation

Reader¶

Card reader for access control


Add it under	Door (up to 1)
Identified by	the one per parent (identity by type) you fill in below
Role	counts towards anti-passback

What you can command it to do¶

Command	What happens
Enroll Card	Start card enrollment process on reader